MTS Systems Series TBF-R User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
1
1 Safety Instructions
1.1 General Notes
This start-up manual describes functions and gives all necessary information for the
designated use of the subassemblies produced by Custom Servo Motors. The
manufacturer is responsible for the preparation of an instruction manual in the national
language of the end user. The preparation of machine-specific risk analyses is also the
manufacturer's duty.
Observance and understanding of the safety instructions and warnings stated in this
document is the condition for the riskless transport, installation and set-up of the
components by qualified personnel.
1.2 Qualified Personnel
Must be able to correctly interpret and realize the safety instructions and warnings.
Furthermore, the personnel entrusted must be familiar with the safety concepts of the
automatization technique and must be trained accordingly. Unqualified actions at the
subassemblies or the non-observance of the warnings stated in this document or attached
to the subassemblies, constitute a risk to life and limb of the user, or cause damage to the
machine or other material property.
1.3 Designated Use
is given when:
any work on equipment of the machine/plant is carried out by a skilled electrician or by
instructed persons under the supervision and guidance of a skilled electrician.
the machine/plant is used only when in a safe and reliable state.
the machine is used in accordance with instructions set out in the operating manual.
1.4 Description of symbols and signal words
DANGER!
Warning against risk of serious injuries. Observance is absolutely
necessary.
!
ATTENTION!
Information, the non-observance of which may lead to substantial damage
to material property. Observance of these safety instructions is absolutely
necessary.
IMPORTANT!
This symbol refers to an information, important with regard to the use of the
machine. Non-observance may lead to troubles.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 50 51

Comments to this Manuals

No comments