MTS Systems Series TBF-R User Manual download pdf (Page 6)

1.5 Safety Notes

As the subassemblies are intended for installation in machines, freely

accessible parts may carry dangerous voltage. The manufacturer must

ensure adequate protection against contact.

Only qualified personnel, who knows the contents of these start-up

instructions, must execute any work on these subassemblies.

The instructions contained in this manual have to be observed strictly, as

a wrong handling causes additional risks.

A correct transport, storage, set-up and assembly of the machine as well

as careful operation and maintenance is an important condition for the

correct and safe operation of these products.

1.6 Set-up

The relevant safety and accident prevention regulations for the individual

case are to be considered.

Devices, intended for installation in cabinets and housings must be

operated only in built-in state.

Prior to setting up the devices, which are operated with line voltage,

please check that the adjusted nominal voltage range is identical to the

local line voltage.

For supply with 24V ensure that the low voltage is mechanically

separated from the mains.

Deviations in the line voltage, exceeding the tolerances stated in the

technical data for these devices, are not allowed, as this may lead to

dangerous conditions.

Voltage dip or voltage failure requires precautions for restoring an

interrupted program. Arising of dangerous operational states must be

avoided.

EMERGENCY-STOP equipment must not effect an uncontrolled or

undefined restart after unlocking. They must remain effective in all modes

of operation.

1 2 3 4 5 6 7 8 9 10 11 ... 50 51

No comments

MTS Systems Series TBF-R User Manual Page 6